BIG AIR T10 AirLift (631 CFM) Exhaust Fan Products

The T10 AirLift Exhaust Fan w/ Temperature and Humidity Controller is powered by AC Infinity and includes Bluetooth.

• Eliminate moisture and excess heat with our state-of-the-art computer-modeled design.
• This galvanized steel framing kit allows the T10 AirLift Exhaust Fan to be installed anywhere on shipping container sidewalls and end walls – from floor to ceiling.
• A high-airflow exhaust fan designed to ventilate out heat, moisture, odor, and dust from various spaces.
• Programmable controller with corded probe, can adjust fan speeds in response to temperatures and humidity.
• Now comes with Bluetooth
• Innovative EC-motor with PWM-control maximizes airflow while reducing energy consumption and noise levels
• Features steel shutters, aluminum blades, and IP-44 rated to be highly resistant to liquid and dust.
  
• The 10" Aluminum Gravity Louvers are also designed to be installed anywhere on shipping container side walls, end walls, or doors – from floor to ceiling.

Specifications

• Fan Size: 10” | Dimensions: 13.0 x 13.0 x 5.9 in. | Airflow: 631 CFM | Noise: 67 dBA | Bearings: Dual Ball

• The T10 Air Lift Exhaust Fan w/ Temperature and Humidity Controller comes with a marking guide to make cutting a hole as easy as possible! Rivets and self-tapping screws are also included (we recommend using rivets).
• The variables inside a shipping container are always changing. When the combination of those variables creates an environment prone to humidity, condensation will happen. The above-mentioned variables include, but are not limited to the following:
  • Humidity
    
  • Interior temperature
    
  • Exterior temperature
    
  • Wind direction
    
  • Wind speed
    
  • Foundation
    
  • Adequate airflow under the container
    
  • Direct sunlight to the roof
    
  • Direct sunlight to walls/doors
    
  • Type of contents stored
    
  • The volume of contents stored inside
  • Color of container
  • Number of stock vents in the container

Unfortunately, stock container vents are not enough to prevent condensation. Typically, used containers have between 2 and 4 vents, and the actual total air passage hole is about the size of a dime. These vents are designed to keep sea water out and are meant more as a method to equalize pressure than to exchange air.

The T10 Air Lift Exhaust Fan w/ Temperature and Humidity Controller is truly a groundbreaking, powerful solution for ventilating shipping containers!

Warranty

• Electrical parts are not covered by warranty after purchase unless there is a manufacturing defect.

Included hardware

• Steel/Steel, 3/16", 1/2", Open Rivets

Photo Gallery 

Installation Instructions

T10 Installation Instructions

Short Link

https://containermodificationworld.com/t10-electric-fan