Channing McCorriston, The Container Guy, introduces a prototype solution designed to simplify the way shipping containers are loaded and transported. The quick attach shipping container skids eliminate the need for permanent full-length skids while maintaining structural integrity and improving efficiency.

Built from years of hands-on container modification experience, this innovation focuses on reducing cost, increasing safety, and streamlining logistics.

What Are Quick Attach Container Skids?

Traditional skidded containers require full-length skid rails welded underneath the entire unit. While effective, this approach adds weight, cost, and fabrication time.

The quick attach system replaces those permanent skids with a left and right skid that attach directly to the ISO corner castings on the bottom of the container.

Instead of modifying every container, one reusable skid set can be used across multiple containers.

How the System Works

Each skid locks into the bottom ISO corner castings using a twist lock and hand nut. This creates a secure, structurally rated attachment point.

Once installed, a continuous cable sling or chain can be wrapped around the skids and used with an oil field winch truck to load the container.

This method improves lifting capability compared to running a 3/8-inch chain directly through the corner castings, which are typically rated around 5,500 pounds in that configuration.

By distributing load through the skid assembly instead of relying solely on corner casting chain connections, the system provides a much stronger structural setup.

Why This Is an Improvement

1. Reduced Equipment Costs

Instead of welding full-length skids under every container, one skid set can service multiple units. This dramatically lowers capital expenditure.

The system delivers functionality similar to fully skidded containers at roughly one-tenth the cost.

2. Improved Loading Flexibility

Containers can be loaded using oil field winch trucks without requiring cranes or additional heavy equipment on site.

This simplifies job site logistics and improves compliance with safety requirements.

3. Faster Setup and Removal

The twist lock and hand nut system allows for rapid attachment and detachment.

Operators can quickly secure the skids, perform the lift, and remove them afterward without permanent modification to the container.

Tradeoffs to Consider

While highly efficient, the quick attach skids are not identical to full-length skids.

• Ground clearance is reduced compared to traditional skid rails

• Weight distribution is not as broad as full-length systems

These skids are best suited for:

• Gravel bases

• Empty containers

• Lightly loaded containers

For heavily loaded units or applications requiring permanent elevation, full skid systems may still be preferred.

Technical Highlights

• Attaches directly to ISO bottom corner castings

• Secured with twist lock and hand nut

• Compatible with continuous cable sling or chain

• Higher structural rating than basic chain-through-casting setups

• Reusable across multiple containers

• Designed for winch truck loading applications

A More Efficient Approach to Container Handling

The quick attach skid system bridges the gap between permanent skid builds and basic corner casting lifting methods.

It reduces fabrication costs, simplifies transport logistics, and allows operators to use equipment already common in oil field and industrial environments.

For companies regularly moving empty or lightly loaded containers, this solution offers a strong balance between cost savings and structural performance.

Final Thoughts

The quick attach container skid prototype represents a practical evolution in container handling.

By leveraging existing ISO corner castings and adding a secure structural attachment system, this design provides a safer, faster, and more economical alternative to traditional skidding methods.

With only minor refinements remaining, the product is nearly ready for public release and could significantly improve container logistics across multiple industries.